Wind Hippie Sailing · vídeo

O que este vídeo aborda

Installing a roller furling system on an 8.5-meter boat requires significantly higher forestay tension than traditional hank-on sails. After replacing a hank-on system with a new Rolly Tasker sail and a Harken furling drum, the crew experienced a persistent clicking noise during operation.29:36 Troubleshooting revealed the noise originated from the Harken foil’s flat edge striking the forestay due to insufficient tension.32:00 The crew initially attempted the installation while at anchor, using a dinghy for assembly and climbing the mast to secure the forestay.30:58 After moving to a marina in Darwin, Australia, to disassemble and inspect the rig, a professional rigger confirmed that the forestay required substantially more tension to prevent the foil from vibrating against the wire.32:06 Following the tension adjustment, the crew tuned the standing rigging to compensate for the mast shifting forward.33:52 Proper installation also requires feeding the bottom of the foil into the drum before securing the bottom shackle.27:28 Increased forestay tension is essential for the proper function of roller furling systems to prevent foil-to-wire contact.

Mais de Wind Hippie Sailing

The Red Bastard Strikes Again WHS189set. de 2026Holly vs Entropy WHSE188ago. de 2026Here there be Whirlpools WHS187ago. de 2026In and Out and In Again WHS186ago. de 2026

De Wind Hippie Sailing — veja o barco, a tripulação e cada vídeo analisado do canal.

The Sailing Directory Newsletter

Um e-mail com os melhores achados da frota — os momentos, barcos e histórias que valem o seu tempo de visualização. Insira seu endereço para receber sua própria cópia.