MJ Sailing · vídeo

O que este vídeo aborda

Matt and Jessica align the longeron and forebeam on their homebuilt catamaran by fabricating custom mounting points and refining structural geometry.▶ 0:00 To ensure proper compression and load distribution, Matt trims 60 millimeters from the longeron, reinforces the forebeam crossing with fiberglass, and rounds over edges near the anchor roller to prevent chafe.▶ 1:22 The installation requires precise integration of aluminum brackets that must be bead-blasted and anodized before final bonding.▶ 0:26 Because the brackets lack tolerance for post-assembly insertion, Matt de-cores the fiberglass structure to allow the hardware to sit flush.▶ 11:20 He determines the final mounting position by manually aligning the pin holes rather than relying on initial geometric calculations.▶ 18:18 The assembly includes a martingale, or seagull striker, to prevent the forebeam from inverting under forestay pressure.▶ 12:19 Matt also plans to route the anchor chain through a fiberglass tube into the bridge deck to shift weight aft while maintaining watertight integrity.▶ 7:15 Precise manual alignment of structural components often proves more accurate than theoretical geometric measurements during custom boat construction.▶ 18:13

Mais de MJ Sailing

The Details That Keep a Boat Dry (MJ Sailing - Episode 379)jun. de 2026Preparing Our Catamaran for Paint—and Me for Captain's Schooljun. de 2026The Bad News: We Have To Cut This Bulkhead Out (MJ Sailing - Episode 377)mai. de 2026We Almost Cooked Our Electrical System… So We Fixed It (MJ Sailing - Episode 375)abr. de 2026

De MJ Sailing — veja o barco, a tripulação e cada vídeo analisado do canal.