BoatworksToday · vídeo

O que este vídeo aborda

Andy from Boatworks Today installs a Cusa composite transom core using Total Boat 2:1 epoxy with slow hardener.5:21 Because the transom features an Armstrong bracket that prevents through-bolting, he constructs five numbered wooden braces to maintain consistent pressure across the panels during the cure.4:08 To manage the large volume of epoxy and prevent premature gelling, he pre-thickens the resin with silica to a "ketchup" consistency before adding the hardener.6:56 He spreads the mixture to an eighth-inch thickness to ensure full surface-to-surface contact, accepting significant squeeze-out as a trade-off for bond integrity.10:16 After the initial cure, he fills perimeter gaps by piping a thicker, high-silica epoxy mixture into the voids using a plastic bag.18:54 He emphasizes safety by moving excess, exothermic-prone epoxy waste outside to a gravel surface to prevent fire hazards in the shop.16:20 Proper bracing and pre-thickening the resin allow for a controlled, high-strength lamination of large composite panels.

Mais de BoatworksToday

Will This Entire Victron Electrical System Fit In My Little Boat?ago. de 2026The Primer Mistake You're Probably Making Painting Your Boat: Film Thickness, Not Smoothness!ago. de 2026V-Berth Electrical Layout On A Small Sailboat: It's Tight, But It Should Work!ago. de 2026Putting the Anona Orbis Solar Camera to Work on My Property ~ 360 Security Camerajul. de 2026

De BoatworksToday — veja o barco, a tripulação e cada vídeo analisado do canal.

The Sailing Directory Newsletter

Um e-mail com os melhores achados da frota — os momentos, barcos e histórias que valem o seu tempo de visualização. Insira seu endereço para receber sua própria cópia.