MJ Sailing · vídeo

O que este vídeo aborda

Matt creates a custom access hatch in the foam-cored bulkhead near the helm station to reach the winches from the inside.0:06 He cuts a six-inch hole using a hole saw, de-cores the foam, fills the edges, and applies gel coat to ensure a flush finish that does not obstruct the sliding door.0:11 To bond the helm station and storage components, the crew sands all mating surfaces with 80-grit sandpaper and cleans them with acetone.5:28 They use a fast-curing methacrylate adhesive, which requires removing masking tape within five to ten minutes to prevent it from hardening onto the surfaces.6:16 Matt uses thickened resin for secondary joints and clamps the pieces in place with blocks to maintain alignment.8:22 After the adhesive cures, he rounds over the exterior edges with a router to create a soft, safe profile before applying fiberglass cloth to both the interior and exterior surfaces.11:54

Mais de MJ Sailing

How Can a Light Switch Be SO COMPLICATED??!! (MJ Sailing - Episode 381)ago. de 2026Painting the Accent Walls On Our Home Built Catamaran (MJ Sailing - Episode 380)jul. de 2026The Details That Keep a Boat Dry (MJ Sailing - Episode 379)jun. de 2026Preparing Our Catamaran for Paint—and Me for Captain's Schooljun. de 2026

De MJ Sailing — veja o barco, a tripulação e cada vídeo analisado do canal.

The Sailing Directory Newsletter

Um e-mail com os melhores achados da frota — os momentos, barcos e histórias que valem o seu tempo de visualização. Insira seu endereço para receber sua própria cópia.