Sailing Solévídeo
EP27 - DIY Boat Project TIGHTENING my HEADSTAY Turnbuckle
27 de agosto de 2023 · 22 min · 1K visualizações
O que este vídeo aborda
The owner of Solé prepares for a forecasted hurricane in Long Beach, California, by securing the dinghy, strapping down solar panels, and adding ratchet straps to the stack pack.8:45 While the storm proves to be a minor rain event, the owner uses the opportunity to perform maintenance on the headstay.12:13 After lowering the headsail and removing the furler shroud, the owner discovers two missing fasteners on the foil assembly, which caused the unit to separate.12:49 To tighten the headstay, the owner hoists the furling system with the headsail halyard to expose the turnbuckle, then applies two full turns to the adjustment.15:08 The owner consults the furler manual to ensure the bottom foil correctly rests on the stop pin before reinstalling the fasteners.18:43 The project concludes by re-rigging the headsail and tying double-hitch stopper knots in the jib sheets to prevent them from pulling through the blocks during tacks.20:12
Barcos neste vídeo
Mais de Sailing Solé
De Sailing Solé — veja o barco, a tripulação e cada vídeo analisado do canal.
The Sailing Directory Newsletter
Um e-mail com os melhores achados da frota — os momentos, barcos e histórias que valem o seu tempo de visualização. Insira seu endereço para receber sua própria cópia.