SVN solovelanet · vídeo

O que este vídeo aborda

Fender selection for sailboats covers sizing, inflation pressure, placement, shape, and accessories, with Maurizio hosting alongside Camilla Mosle of SVB and Lillo Bagnato of Spartivento.▶ 0:41 Fender length must match hull freeboard: the fender should sit roughly 25 cm above the waterline and stop 20–25 cm short of the water's surface, preventing it from being ejected when two hulls compress it or lifted by waves.▶ 4:31 Inflation pressure should not exceed 0.2 bar; over-inflation stiffens the fender, reduces shock absorption, and causes a banana-shaped deformation.▶ 6:01 Sizing follows the Poliform F-series (F2, F3, F4, etc.), but each manufacturer varies dimensions slightly, so checking actual measurements matters.▶ 3:55 Cylindrical fenders belong amidships at the widest beam; round ball fenders go at bow and stern appendages to distribute load evenly.▶ 8:27 Ball fenders work poorly on a transom because they deflect sideways or upward on contact; the flat rectangular "tablet" fender, tied top and bottom through its four attachment points, protects a transom reliably.▶ 11:43 For very low docks where a vertical fender would touch the water, rigging it horizontally is the only partial workaround.▶ 7:50 Lightweight inflatable fenders serve superyachts where a solid fender of equivalent size (70 cm–1 m diameter) would weigh tens of kilograms.▶ 9:31 Fender socks protect both the hull and the fender itself from UV-degraded PVC, which turns tacky and stains gelcoat.▶ 12:22 A Poliform F3 (76 cm) costs roughly €73; a Citec F6 (1 m) runs about €86; a 29 cm ball fender costs around €26.▶ 13:52

Mais de SVN solovelanet

Spliced ropes: how much they cost, which ones to choose, and how to make themjul. de 2026Marina Cala dei Sardi: Sardinia's green marinajun. de 2026Bavaria C46, the German cruiser designed by Cossuttijun. de 2026How to buy the EPIRB that can save your lifemai. de 2026

De SVN solovelanet — veja o barco, a tripulação e cada vídeo analisado do canal.