BoatHowTo · vídeo

O que este vídeo aborda

Nigel Calder explains that turbocharger cooldown before engine shutdown matters far more than warmup.1:29 If an engine is shut down immediately after running at wide-open throttle, the turbo continues spinning while red-hot with no fresh oil reaching the bearings; the residual oil carbonizes and destroys the bearings.0:50 In a typical boating context, slow-speed maneuvering into a slip or while pulling anchor provides the cooldown naturally, so no deliberate idle period is usually needed.1:19 Warmup is similarly a non-issue: by the time a boat clears the dock or retrieves the anchor, the engine is warm enough to go to full throttle.1:39 Calder also recommends periodically running the engine at high speed and load to prevent carbon buildup and to exercise the turbo's wastegate — a bypass valve that opens only above a certain RPM threshold and can seize if never actuated, causing further problems.2:04 The practical rule: normal marina maneuvering handles cooldown automatically, but skippers who never push their engines risk a stuck wastegate.

Mais de BoatHowTo

How to keep you TANK CLEAN in the days of BIODIESEL.. | Ask The Expert with NIGEL CALDER08/2026PARALLELING Conductors for AMPACITY - is that SAFE?? | Ask The Expert with NIGEL CALDER08/2026ENGINE OIL turns BLACK right after Oil Change?? | Ask The Expert with NIGEL CALDER08/2026Same LAYUP RECOMMENDATIONS for FAME and HVO bio diesel? | Ask The Expert with NIGEL CALDER08/2026

De BoatHowTo — veja o barco, a tripulação e todos os vídeos analisados do canal.

The Sailing Directory Newsletter

Um email com os melhores achados da frota — os momentos, barcos e histórias que valem o seu tempo de visualização. Insira o seu endereço para receber a sua cópia.