TheSailingChannel.TVvídeo
Aire-Flow Hypervent Mattress Underlay
9 de setembro de 2025 · 5 min · 1K visualizações · Georgetown, Guyana
O que este vídeo aborda
A 14-foot by 39-inch roll of Aire-Flow Hypervent under-mattress fabric is cut and fitted into a V-berth to reduce moisture buildup beneath the mattresses.0:09 The installer removes two large V-berth cushions, unrolls the Hypervent on the dock, and weights it with 5-pound propane tanks while marking cuts.1:11 Cushions are laid face-down on the fabric with inside edges aligned to the manufacturer's center flap, and a 7-inch border is added along the hull-side edges to maximize airflow.1:47 Cutting requires multiple passes with a razor knife to sever all fibers cleanly.2:12 The two fabric pieces are joined at the center seam with supplied tape.3:08 Final trimming removes fabric from the berth entryway to prevent skin abrasion, while the hull-side edges are left to run up the first plank width — a compromise after a full 4-inch hull overlap caused the tight-fitting mattresses to slant inward.4:14 The finished installation sits flat under both mattresses with fabric running slightly up the hull sides to promote airflow and prevent condensation.4:21
Mais de TheSailingChannel.TV
De TheSailingChannel.TV — veja o barco, a tripulação e todos os vídeos analisados do canal.
The Sailing Directory Newsletter
Um email com os melhores achados da frota — os momentos, barcos e histórias que valem o seu tempo de visualização. Insira o seu endereço para receber a sua cópia.