BoatworksToday · vídeo

O que este vídeo aborda

Restoring the cabin sides of a 1970 Paceship Yachts Westwind 24 requires building up fiberglass thickness around four port light cutouts. After installing a single layer of 1.5-ounce chopped strand mat as a backing piece, the repair process involves applying two layers of 1708 biaxial fiberglass cloth using non-waxed laminating polyester resin.5:54 To ensure proper adhesion and surface contact, a thin coat of repair putty creates a ramp around the cutout edges before the glass is laid wet-on-wet.5:29 Because the exterior laminate must remain flush with the surrounding cabin, the final thickness is achieved by sanding and applying fairing compound rather than adding more glass.15:22 To reach the target quarter-inch thickness, additional layers of 1708 will be laminated to the interior side of the cabin, where space allows for extra build-up behind future interior trim.16:21 A wax-containing gel coat serves as a final curing agent and guide coat to verify thickness before sanding.11:55

Mais de BoatworksToday

I Was Wrong About My Boat's Victron Wiring (You Were Right!)09/2026Will This Entire Victron Electrical System Fit In My Little Boat?08/2026The Primer Mistake You're Probably Making Painting Your Boat: Film Thickness, Not Smoothness!08/2026V-Berth Electrical Layout On A Small Sailboat: It's Tight, But It Should Work!08/2026

De BoatworksToday — veja o barco, a tripulação e todos os vídeos analisados do canal.

The Sailing Directory Newsletter

Um email com os melhores achados da frota — os momentos, barcos e histórias que valem o seu tempo de visualização. Insira o seu endereço para receber a sua cópia.