BoatworksToday · video

What this video covers

Restoring the cabin sides of a 1970 Paceship Yachts Westwind 24 requires building up fiberglass thickness around four port light cutouts. After installing a single layer of 1.5-ounce chopped strand mat as a backing piece, the repair process involves applying two layers of 1708 biaxial fiberglass cloth using non-waxed laminating polyester resin.5:54 To ensure proper adhesion and surface contact, a thin coat of repair putty creates a ramp around the cutout edges before the glass is laid wet-on-wet.5:29 Because the exterior laminate must remain flush with the surrounding cabin, the final thickness is achieved by sanding and applying fairing compound rather than adding more glass.15:22 To reach the target quarter-inch thickness, additional layers of 1708 will be laminated to the interior side of the cabin, where space allows for extra build-up behind future interior trim.16:21 A wax-containing gel coat serves as a final curing agent and guide coat to verify thickness before sanding.11:55

More from BoatworksToday

V-Berth Electrical Layout On A Small Sailboat: It's Tight, But It Should Work!Aug 2026Putting the Anona Orbis Solar Camera to Work on My Property ~ 360 Security CameraJul 2026Fiberglassing The Bulkheads & Sole On My 1970 Westwind Paceship 24 Pocket Cruiser!Jul 2026I Wasn't Sure This Would Work | 42 Hour BBQ on Solar Power | Jackery HomePower 3600 Plus!Jul 2026

From BoatworksToday — see the channel’s boat, crew, and every analyzed video.

The Sailing Directory Newsletter

One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.