BoatHowTovídeo
1-2-both switch - Cost effective charging system on small boats? 🤔 Ask The Expert with NIGEL CALDER
26 de junho de 2026 · 2 min · 1K visualizações
Nigel Calder explains battery switch positions on a boat
O que este vídeo aborda
Nigel Calder addresses whether a pontoon boat owner can charge a starter battery and a house battery in parallel through a Perco 1-2-both switch by connecting a charger to one battery.0:20 Theoretically, parallel charging of batteries with different CCA and amp-hour ratings is wrong, but Calder explains it works in practice because a cranking battery stays near full charge — engine cranking draws only a brief burst of current, quickly replaced by the alternator.0:46 The house battery absorbs most of the charging current, so the charger should connect to the house battery, not the starter.1:07 The parallel switch can then top off the cranking battery without significant damage, though it may shorten that battery's life.1:46 The critical risk: leaving the switch in the parallel position drains both batteries, eliminating starting power.1:46 Jan Attenstedt recommends a dual-output charger with a dedicated ~3-amp starter-battery output as a cleaner alternative for around $100, removing the need to remember switching discipline.1:55 The practical takeaway is that the 1-2-both method is a workable, low-cost solution on small boats, but a two-output charger eliminates the main failure mode.
Mais de BoatHowTo
De BoatHowTo — veja o barco, a tripulação e todos os vídeos analisados do canal.
The Sailing Directory Newsletter
Um email com os melhores achados da frota — os momentos, barcos e histórias que valem o seu tempo de visualização. Insira o seu endereço para receber a sua cópia.



