MJ Sailing · vídeo

O que este vídeo aborda

To protect the interior of a boat undergoing a refit, the crew seals deck hatch openings with plywood covers and shrink wrap. They cut 3/4-inch plywood to fit the hatch cutouts, coating the wood with Total Boat Epoxy to prevent water damage.4:52 After cleaning the deck surface with denatured alcohol, they apply butyl tape around the perimeter of each opening to create a watertight seal.5:56 The plywood covers are secured by screwing them into the deck from the underside.7:32 The crew then applies Dr. Shrink wrap over the covers, using a Stanley heat gun to tension the material.8:30 They use 4-inch adhesive tape to bond the shrink wrap to the deck, maintaining a 2-inch margin for adhesion.9:13 The process requires careful heat application to avoid over-shrinking, which can cause the tape to pull away from the deck.13:01 This temporary measure prevents water intrusion while the vessel remains in the work yard awaiting final painting and permanent hatch installation.

Mais de MJ Sailing

How Can a Light Switch Be SO COMPLICATED??!! (MJ Sailing - Episode 381)08/2026Painting the Accent Walls On Our Home Built Catamaran (MJ Sailing - Episode 380)07/2026The Details That Keep a Boat Dry (MJ Sailing - Episode 379)06/2026Preparing Our Catamaran for Paint—and Me for Captain's School06/2026

De MJ Sailing — veja o barco, a tripulação e todos os vídeos analisados do canal.

The Sailing Directory Newsletter

Um email com os melhores achados da frota — os momentos, barcos e histórias que valem o seu tempo de visualização. Insira o seu endereço para receber a sua cópia.