MJ Sailing · vidéo

Ce que couvre cette vidéo

To protect the interior of a boat undergoing a refit, the crew seals deck hatch openings with plywood covers and shrink wrap. They cut 3/4-inch plywood to fit the hatch cutouts, coating the wood with Total Boat Epoxy to prevent water damage.4:52 After cleaning the deck surface with denatured alcohol, they apply butyl tape around the perimeter of each opening to create a watertight seal.5:56 The plywood covers are secured by screwing them into the deck from the underside.7:32 The crew then applies Dr. Shrink wrap over the covers, using a Stanley heat gun to tension the material.8:30 They use 4-inch adhesive tape to bond the shrink wrap to the deck, maintaining a 2-inch margin for adhesion.9:13 The process requires careful heat application to avoid over-shrinking, which can cause the tape to pull away from the deck.13:01 This temporary measure prevents water intrusion while the vessel remains in the work yard awaiting final painting and permanent hatch installation.

Plus de vidéos de MJ Sailing

How Can a Light Switch Be SO COMPLICATED??!! (MJ Sailing - Episode 381)août 2026Painting the Accent Walls On Our Home Built Catamaran (MJ Sailing - Episode 380)juil. 2026The Details That Keep a Boat Dry (MJ Sailing - Episode 379)juin 2026Preparing Our Catamaran for Paint—and Me for Captain's Schooljuin 2026

De MJ Sailing — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.