Sven Yrvind · video

What this video covers

Sven Yrvind tests a mock-up lid for the aft hatch on the Yrvind, checking fit against the gasket edges.▶ 0:02 The current mock-up is wood, but the final version will use Tufnol, which runs a few millimetres thinner.▶ 0:32 Fastening points are marked on the lid with circular marks.▶ 0:08 The fit leaves a few millimetres of clearance on each side, and the piece extends slightly outside center — a compromise Yrvind accepts, noting the centering will be corrected on the next boat.▶ 0:44 The edges are glued with epoxy at this stage.▶ 1:03 The mock-up is not cardboard and will be reinforced before structural testing, which Yrvind considers necessary given the significant forces the hatch lid must withstand.▶ 1:08

More from Sven Yrvind

Tools for Body, Boat and Sails. Anything missing ?Aug 2026More Headgear.Jul 2026Boat Hook and Sou'wester in the Bow.Jul 2026Boat Hook and Food.Jul 2026

From Sven Yrvind — see the channel’s boat, crew, and every analyzed video.

The Sailing Directory Newsletter

One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.