Epiphany Sailingvideo
Custom Swim Platform support chains replaced on our C&C 39 sailboat
February 25, 2024 · 2 min · 88 views
What this video covers
On the C&C 39 *Epiphany*, two decorative chrome chains supporting a custom hinged swim platform had rusted nearly through at their attachment points.0:29 Gordon measured the failed chains at 20 inches, cut replacements from heavier spare chain using an angle grinder with a cutoff wheel while holding the chain steady with vice grips, then swapped the new sections from the dinghy by unclipping the old chains at both ends.1:13 When the original links came off, one had corroded down to a single thread of metal.1:57 The replacement chain is galvanized and heavier gauge than the original chrome chain; the eye bolts and clips on the platform are stainless steel.2:10 The project was completed quickly and without incident.2:28 Catching corrosion at attachment points before failure matters most on load-bearing fittings where a break would drop someone into the water with no warning.
Boats in this video
More from Epiphany Sailing
From Epiphany Sailing — see the channel’s boat, crew, and every analyzed video.
The Sailing Directory Newsletter
One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.