RAN Sailingvideo
Bending and Laminating Wood - Our 52 ft Self-Built Sailboat - Ep. 471 Ran Sailing
January 2, 2026 · 23 min · 107K views · Karlstad, Sweden
Carpenter removes clamped laminated wood from mold in workshop
What this video covers
Johan fabricates custom radius trim for a 52-foot self-built sailboat by laminating thin wood veneers over a mold.▶ 0:17 To achieve a 90-degree corner with a 15-millimeter radius, he stacks 0.8-millimeter veneers with epoxy, using a mold designed with an 88-degree angle to compensate for material spring-back.▶ 3:24 He avoids thicker 1.5-millimeter veneers for tight radii, as they proved prone to cracking during the clamping process.▶ 14:20 After curing, he trims the laminated pieces on a bandsaw and notches them to fit the closet structure.▶ 16:43 Beyond the trim, the interior build includes installing ventilation holes in cabinet faces and replacing traditional fixed shelves with pull-out mesh baskets to improve airflow and prevent dampness against the hull.▶ 21:36 The project also incorporates integrated LED strip lighting within the lockers and along the bed headboard.▶ 23:29 These detailed interior finishes prioritize safety by eliminating sharp corners and maximizing storage efficiency.
More from RAN Sailing
From RAN Sailing — see the channel’s boat, crew, and every analyzed video.