RAN Sailingvideo
Bending and Laminating Wood - Our 52 ft Self-Built Sailboat - Ep. 471 Ran Sailing
2 January 2026 · 23 min · 107K views · Karlstad, Sweden
Carpenter removes clamped laminated wood from mold in workshop
What this video covers
Johan fabricates custom radius trim for a 52-foot self-built sailboat by laminating thin wood veneers over a mould.0:17 To achieve a 90-degree corner with a 15-millimetre radius, he stacks 0.8-millimetre veneers with epoxy, using a mould designed with an 88-degree angle to compensate for material spring-back.3:24 He avoids thicker 1.5-millimetre veneers for tight radii, as they proved prone to cracking during the clamping process.14:20 After curing, he trims the laminated pieces on a bandsaw and notches them to fit the closet structure.16:43 Beyond the trim, the interior build includes installing ventilation holes in cabinet faces and replacing traditional fixed shelves with pull-out mesh baskets to improve airflow and prevent dampness against the hull.21:36 The project also incorporates integrated LED strip lighting within the lockers and along the bed headboard.23:29 These detailed interior finishes prioritise safety by eliminating sharp corners and maximising storage efficiency.
More from RAN Sailing
From RAN Sailing — see the channel’s boat, crew, and every analysed video.
The Sailing Directory Newsletter
One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.