SmoCo Sailing · video

What this video covers

The crew of the sailboat Cosmo spends three weeks at anchor in Santa Barbara, California, while addressing recurring mechanical and electrical failures.0:56 To stabilize the outboard motor lift, which repeatedly popped out of its socket, the crew installs a custom steel brace reinforced with self-adhesive rubber tape to prevent lateral movement.3:37 The boat’s existing electrical system fails to meet daily power demands, causing the inverter to shut down during high-draw activities like heating water and toasting bread.16:02 To resolve this, the crew purchases a portable generator.16:56 Initial attempts to use the generator result in an "overload" error on the Victron MultiPlus 2 inverter.19:36 The crew corrects this by adjusting the inverter’s AC input current limit from 16 amps down to 10 amps, successfully allowing the generator to charge the battery bank without exceeding its 1900-watt rated output.20:56 The experience highlights the necessity of matching generator output to inverter settings for sustainable power management.

Boats in this video

More from SmoCo Sailing

The Discovery That Ruined Our Winter Cruising Plans & Marine Fridge Install | La Paz, Mexico | Ep 77Aug 2026Replacing Our Sailboat Water Tank Flow On/Off Switches | Project Mini-Sode 6Aug 2026Our Chill Anchorage Turned Into a Recovery Mission: Lost Gear & We Had to Go | Ep 76Aug 2026We Got Scammed & the Fridge Fiasco Gets More Complicated | Isla Coronado & Isla Danzante | Ep 75Aug 2026

From SmoCo Sailing — see the channel’s boat, crew, and every analyzed video.

The Sailing Directory Newsletter

One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.