SmoCo Sailing · vidéo

Ce que couvre cette vidéo

The crew of the sailboat Cosmo spends three weeks at anchor in Santa Barbara, California, while addressing recurring mechanical and electrical failures.0:56 To stabilize the outboard motor lift, which repeatedly popped out of its socket, the crew installs a custom steel brace reinforced with self-adhesive rubber tape to prevent lateral movement.3:37 The boat’s existing electrical system fails to meet daily power demands, causing the inverter to shut down during high-draw activities like heating water and toasting bread.16:02 To resolve this, the crew purchases a portable generator.16:56 Initial attempts to use the generator result in an "overload" error on the Victron MultiPlus 2 inverter.19:36 The crew corrects this by adjusting the inverter’s AC input current limit from 16 amps down to 10 amps, successfully allowing the generator to charge the battery bank without exceeding its 1900-watt rated output.20:56 The experience highlights the necessity of matching generator output to inverter settings for sustainable power management.

Bateaux dans cette vidéo

Plus de vidéos de SmoCo Sailing

The Discovery That Ruined Our Winter Cruising Plans & Marine Fridge Install | La Paz, Mexico | Ep 77août 2026Replacing Our Sailboat Water Tank Flow On/Off Switches | Project Mini-Sode 6août 2026Our Chill Anchorage Turned Into a Recovery Mission: Lost Gear & We Had to Go | Ep 76août 2026We Got Scammed & the Fridge Fiasco Gets More Complicated | Isla Coronado & Isla Danzante | Ep 75août 2026

De SmoCo Sailing — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.