BoatsMariner 39 (Berry & White)

Mariner 39 (Berry & White)

Masthead Sloop · Fin With Rudder On Skeg · 1980–1982

A masthead sloop commissioned by The Moorings for charter service, featuring a robust fin keel and skeg-mounted rudder

Designed by Eric White & Arthur Berry.

LOA
Beam
Draft (max)
Displacement
Ballast
Hull type
Fin With Rudder On Skeg

Is it for you?

Character

Where this design lands on the numbers a shopper trusts — read straight from her own ratios.

LivelySea-kindly

Her moderate displacement on a moderate beam gives 32 — a sea-kindly motion in a seaway.

Comfort ratio 32
CoastalBluewater

1.78 — just under the 2.0 offshore line; her beam is modest for her weight.

Capsize screening 1.78
LightHeavy

270 — moderately heavy for her waterline, a balanced cruising weight.

Displacement / length 270
EasygoingPowered-up

15.4 — moderate power for her weight; steady, all-round performance.

Sail area / displacement 15.4
TenderStiff

33% of her weight is ballast — on the tender side; she'll heel readily and want a reef sooner.

Ballast 33%

A capable cruiser that sits just inside the offshore line — coastal work with real passages in her.

The record

Full specifications

The complete reference set — tap any figure to switch between metric and imperial.

Dimensions
Weights
Ballast / displacement
33.3%
Rig & sail area
Rig
Masthead Sloop
Ratios
SA / displacement
15.4
Displacement / length
269.7
Comfort ratio
31.6
Capsize screening
1.78
Hull speed
7.5 kn
Pounds / inch immersion
1293
Hull
Hull type
Fin with rudder on skeg
Construction
Fiberglass
Ballast type
Lead
Production
Years built
1980–1982
Units built
29
Designer
Eric White, Arthur Berry
Builder
Mariner Yacht Company

Boats like this, on the water

Nobody has filmed this one — but these are close.

Comparable boats the fleet has on camera: same type, within a quarter of her length. Open the boat, or watch the video — a timestamp means she only appears in passing.

RM Yachts 118011.80 mSame hull familyNear-identical lengthA Marc Lombard-designed performance cruiser featuring a wide beam, dual rudders, and a powerful cutter rig
Morgan Yachts 38211.68 mSame hull familyNear-identical lengthA Ted Brewer-designed masthead sloop built for offshore stability, featuring a skeg-hung rudder and a stiff displacement
Westsail 3911.79 mSame hull familyNear-identical lengthA Robert Perry-designed cutter with a production history spanning three different names and international builds.
Najad Yachts 39011.75 mSame hull familyNear-identical lengthAn 11.75-metre masthead sloop with a 42% ballast ratio, built for over a decade to provide a stable, predictable offshore platform
Sabre Yachts 38 MKII11.79 mSame hull familyNear-identical lengthA 1988-1995 production cruiser with a 1.98m draft and a skeg-mounted rudder for offshore stability
C&C Yachts 3911.96 mSame hull family0.2 m longerA 1971-1974 production masthead sloop with a moderate displacement-to-length ratio, balanced for coastal cruising

The family

Related models

The designs closest to hers — usually the rest of the builder's range, sometimes the same hull sold under another name.

Keep looking

Nothing filmed of this one yet

Two ways to keep looking — both search what the fleet has actually recorded.

The newsletter

New boats, new stories, from everywhere.

One email from the fleet — boats newly added, videos newly analyzed. No noise.

Report an issue