BoatsNautor Pj-37

Nautor Pj-37

Masthead Sloop · Fin With Rudder On Skeg · First built 1970

A Sparkman & Stephens design identical to the Swan 37, built by Nautor as a masthead sloop with a skeg-hung rudder

Designed by Sparkman & Stephens.

LOA
Beam
Draft (max)
Displacement
Ballast
Hull type
Fin With Rudder On Skeg

Is it for you?

Character

Where this design lands on the numbers a shopper trusts — read straight from her own ratios.

LivelySea-kindly

Her heavy displacement on a narrow beam gives 34 — a sea-kindly motion in a seaway.

Comfort ratio 34
CoastalBluewater

1.72 — just under the 2.0 offshore line; her beam is modest for her weight.

Capsize screening 1.72
LightHeavy

340 — heavy for her waterline, built to carry stores and ride steadily.

Displacement / length 340
EasygoingPowered-up

15.5 — moderate power for her weight; steady, all-round performance.

Sail area / displacement 15.5
TenderStiff

47% of her weight is ballast — stiff, standing up well to her sails.

Ballast 47%

Built heavy and sea-kindly — a boat made to cross oceans and forgive a rough night.

The record

Full specifications

The complete reference set — tap any figure to switch between metric and imperial.

Dimensions
Weights
Ballast / displacement
47.4%
Rig & sail area
Rig
Masthead Sloop
Ratios
SA / displacement
15.5
Displacement / length
339.8
Comfort ratio
33.9
Capsize screening
1.72
Hull speed
7.0 kn
Pounds / inch immersion
1039
Hull
Hull type
Fin with rudder on skeg
Construction
Fiberglass
Ballast type
Lead
Production
Years built
First built 1970
Designer
Sparkman, Stephens
Builder
Nautor

Boats like this, on the water

Nobody has filmed this one — but these are close.

Comparable boats the fleet has on camera: same type, within a quarter of her length. Open the boat, or watch the video — a timestamp means she only appears in passing.

Swan 3711.13 mSame hull familyNear-identical lengthAn IOR 1-ton racer also marketed as the Palmer Johnson 37, featuring a masthead rig and a skeg-mounted rudder
Pacific Seacraft 3711.25 mSame hull familyNear-identical lengthOriginally launched as the Crealock 37, this cutter features a 38% ballast ratio and a hull speed of 7.06 knots
Cruising Consultants Crealock 3711.25 mSame hull familyNear-identical lengthA William Crealock-designed masthead sloop with a skeg-hung rudder, built for offshore stability and heavy-weather comfort
S2 Yachts 11.0 C10.97 mSame hull family0.2 m shorterA center-cockpit cruiser by Arthur Edmunds, designed for stability and comfort with a skeg-mounted rudder
Rustler Yachts 3711.28 mSame hull familyNear-identical lengthA masthead sloop with a fin keel and skeg-hung rudder, designed by Stephen Jones for modern offshore cruising
Pearson Yachts 36-211.13 mSame hull familyNear-identical lengthA 1980s production masthead sloop with a high-aspect fin keel and spade rudder, optimized for performance cruising

The family

Related models

The designs closest to hers — usually the rest of the builder's range, sometimes the same hull sold under another name.

Keep looking

Nothing filmed of this one yet

Two ways to keep looking — both search what the fleet has actually recorded.

The newsletter

New boats, new stories, from everywhere.

One email from the fleet — boats newly added, videos newly analyzed. No noise.

Report an issue