BoatsSalmo Salar

Salmo Salar

Masthead Sloop · Long Keel · First built 1966

A Laurent Giles design from the 1966 Yachting World competition, this long-keeled cruiser was built in wood and fiberglass

Designed by Laurent Giles & Jack Laurent Giles, built by Essex Boatbuilders Ltd.

LOA
Beam
Draft (max)
Displacement
Ballast
Hull type
Long Keel

Is it for you?

Character

Where this design lands on the numbers a shopper trusts — read straight from her own ratios.

LivelySea-kindly

Her heavy displacement on a narrow beam gives 43 — a heavy, notably soft motion offshore.

Comfort ratio 43
CoastalBluewater

At 1.58 she sits well under the 2.0 line — a solidly ocean-capable hull for her size.

Capsize screening 1.58
LightHeavy

349 — heavy for her waterline, built to carry stores and ride steadily.

Displacement / length 349
EasygoingPowered-up

14.5 — modest power for her weight; easygoing rather than lively, and happier with a breeze.

Sail area / displacement 14.5
TenderStiff

34% of her weight is ballast — on the tender side; she'll heel readily and want a reef sooner.

Ballast 34%

Built heavy and sea-kindly — a boat made to cross oceans and forgive a rough night.

  • Heavier than ~77% of boats her size on file

Compared with 407 boats of the same type within a quarter of her length.

The record

Full specifications

The complete reference set — tap any figure to switch between metric and imperial.

Dimensions
Weights
Ballast / displacement
34.3%
Rig & sail area
Rig
Masthead Sloop
Ratios
SA / displacement
14.5
Displacement / length
349.1
Comfort ratio
42.9
Capsize screening
1.58
Hull speed
7.5 kn
Pounds / inch immersion
1246
Hull
Hull type
Long Keel
Construction
Fiberglass
Production
Years built
First built 1966
Units built
45
Designer
Laurent Giles, Jack Laurent Giles
Builder
Essex Boatbuilders Ltd, Moody Yachts (A. H. Moody, Sons)

Boats like this, on the water

Nobody has filmed this one — but these are close.

Comparable boats the fleet has on camera: same type, within a quarter of her length. Open the boat, or watch the video — a timestamp means she only appears in passing.

Tayana 3711.18 mSame hull family0.7 m shorterA Robert Perry-designed long-keel cutter with a heavy displacement and a production run of nearly 600 hulls
Whitby Boatworks 4212.80 mSame hull family0.9 m longerAn Edward S. Brewer-designed long-keeled ketch built for offshore comfort and stability over a long production run
Cabo Rico 3811.58 mSame hull family0.3 m shorterAn aft-cockpit evolution of the Tiburon 36, offering a heavy-displacement cutter platform for stable blue-water sailing
Hans Christian 38T11.56 mSame hull family0.3 m shorterA traditional cutter with a long keel and high comfort ratio, built between 1976 and 1989 for steady offshore cruising
Downeaster 3811.58 mSame hull family0.3 m shorterA 1974-era cutter with a 35.4 comfort ratio, built for stable, long-distance voyaging on a heavy-displacement hull
Islander Yachts Freeport 4112.50 mSame hull family0.6 m longerA long-keeled staysail ketch derived from the Islander 40MS, featuring an interior redesign by Robert Perry

The family

Related models

The designs closest to hers — usually the rest of the builder's range, sometimes the same hull sold under another name.

Keep looking

Nothing filmed of this one yet

Two ways to keep looking — both search what the fleet has actually recorded.

The newsletter

New boats, new stories, from everywhere.

One email from the fleet — boats newly added, videos newly analyzed. No noise.

Report an issue