BoatworksToday · βίντεο

Τι καλύπτει αυτό το βίντεο

Andy discovers that the mainsail currently on his 24-foot sailboat is incorrect after measuring a 21-foot luff against a 30-foot mast.1:56 The discrepancy suggests the existing sail was sourced from a different vessel, as the current dimensions would place the boom roughly 12 feet above the deck.2:32 He plans to coordinate with Precision Sails to determine the correct measurements for a new sail.12:35

Separately, the project continues with the fabrication of new cabin sole panels.5:40 After applying an initial layer of fiberglass to the underside, he trims the edges to ensure a clean surface for subsequent glassing.5:07 He uses a non-waxed polyester laminating resin and plans to finish with a wax-containing gel coat to create an air barrier for proper curing.9:51 Before installing the panels, he must strip existing one-part paint from the hull interior to ensure compatibility with a planned two-part barrier coat.10:36 The project also awaits the arrival of new Victron electrical components.13:09

Περισσότερα από το BoatworksToday

Will This Entire Victron Electrical System Fit In My Little Boat?Αυγ 2026The Primer Mistake You're Probably Making Painting Your Boat: Film Thickness, Not Smoothness!Αυγ 2026V-Berth Electrical Layout On A Small Sailboat: It's Tight, But It Should Work!Αυγ 2026Putting the Anona Orbis Solar Camera to Work on My Property ~ 360 Security CameraΙουλ 2026

Από BoatworksToday — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.