BoatworksToday · vídeo

Qué cubre este vídeo

Andy discovers that the mainsail currently on his 24-foot sailboat is incorrect after measuring a 21-foot luff against a 30-foot mast.1:56 The discrepancy suggests the existing sail was sourced from a different vessel, as the current dimensions would place the boom roughly 12 feet above the deck.2:32 He plans to coordinate with Precision Sails to determine the correct measurements for a new sail.12:35

Separately, the project continues with the fabrication of new cabin sole panels.5:40 After applying an initial layer of fiberglass to the underside, he trims the edges to ensure a clean surface for subsequent glassing.5:07 He uses a non-waxed polyester laminating resin and plans to finish with a wax-containing gel coat to create an air barrier for proper curing.9:51 Before installing the panels, he must strip existing one-part paint from the hull interior to ensure compatibility with a planned two-part barrier coat.10:36 The project also awaits the arrival of new Victron electrical components.13:09

Más de BoatworksToday

Why Is My 920Ah Sailboat Battery Bank So Big FOR THIS TINY SAILBOAT?? This Is Why ;-)!oct 2026New Epoch Batteries Just Landed for My Victron System But It's On Hold For Annapolis Boat Show Prep!sept 2026I Was Wrong About My Boat's Victron Wiring (You Were Right!)sept 2026Will This Entire Victron Electrical System Fit In My Little Boat?ago 2026

De BoatworksToday — mira el barco del canal, la tripulación y cada vídeo analizado.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que merecen tu tiempo de visionado. Introduce tu dirección para recibir tu propia copia.