BoatworksToday · vídeo

O que este vídeo aborda

Andy discovers that the mainsail currently on his 24-foot sailboat is incorrect after measuring a 21-foot luff against a 30-foot mast.1:56 The discrepancy suggests the existing sail was sourced from a different vessel, as the current dimensions would place the boom roughly 12 feet above the deck.2:32 He plans to coordinate with Precision Sails to determine the correct measurements for a new sail.12:35

Separately, the project continues with the fabrication of new cabin sole panels.5:40 After applying an initial layer of fiberglass to the underside, he trims the edges to ensure a clean surface for subsequent glassing.5:07 He uses a non-waxed polyester laminating resin and plans to finish with a wax-containing gel coat to create an air barrier for proper curing.9:51 Before installing the panels, he must strip existing one-part paint from the hull interior to ensure compatibility with a planned two-part barrier coat.10:36 The project also awaits the arrival of new Victron electrical components.13:09

Mais de BoatworksToday

Why Is My 920Ah Sailboat Battery Bank So Big FOR THIS TINY SAILBOAT?? This Is Why ;-)!10/2026New Epoch Batteries Just Landed for My Victron System But It's On Hold For Annapolis Boat Show Prep!09/2026I Was Wrong About My Boat's Victron Wiring (You Were Right!)09/2026Will This Entire Victron Electrical System Fit In My Little Boat?08/2026

De BoatworksToday — veja o barco, a tripulação e todos os vídeos analisados do canal.

The Sailing Directory Newsletter

Um email com os melhores achados da frota — os momentos, barcos e histórias que valem o seu tempo de visualização. Insira o seu endereço para receber a sua cópia.