BoatworksToday · video

Cosa tratta questo video

Andy discovers that the mainsail currently on his 24-foot sailboat is incorrect after measuring a 21-foot luff against a 30-foot mast.1:56 The discrepancy suggests the existing sail was sourced from a different vessel, as the current dimensions would place the boom roughly 12 feet above the deck.2:32 He plans to coordinate with Precision Sails to determine the correct measurements for a new sail.12:35

Separately, the project continues with the fabrication of new cabin sole panels.5:40 After applying an initial layer of fiberglass to the underside, he trims the edges to ensure a clean surface for subsequent glassing.5:07 He uses a non-waxed polyester laminating resin and plans to finish with a wax-containing gel coat to create an air barrier for proper curing.9:51 Before installing the panels, he must strip existing one-part paint from the hull interior to ensure compatibility with a planned two-part barrier coat.10:36 The project also awaits the arrival of new Victron electrical components.13:09

Altro da BoatworksToday

Why Is My 920Ah Sailboat Battery Bank So Big FOR THIS TINY SAILBOAT?? This Is Why ;-)!ott 2026New Epoch Batteries Just Landed for My Victron System But It's On Hold For Annapolis Boat Show Prep!set 2026I Was Wrong About My Boat's Victron Wiring (You Were Right!)set 2026Will This Entire Victron Electrical System Fit In My Little Boat?ago 2026

Da BoatworksToday — guarda la barca, l'equipaggio e ogni video analizzato del canale.

The Sailing Directory Newsletter

Una email con le migliori scoperte della flotta — i momenti, le barche e le storie che meritano il tuo tempo di visione. Inserisci il tuo indirizzo per riceverne una copia.