Sailing Squib · βίντεο

Τι καλύπτει αυτό το βίντεο

Refitting the pocket catamaran Squib involves removing deck hardware, grinding away damaged gelcoat, and repairing structural stress cracks. The project begins by stripping the safety rails and jib tracks from the deck, though some fasteners require drilling or grinding when nuts are inaccessible or seized.0:47 After clearing the hardware, the crew grinds down areas of degraded gelcoat and removes remnants of old hinge mounts.4:24 Inspection reveals stress cracks at four locations where internal bulkheads meet the deck, likely caused by structural loads near window cutouts.7:23 These cracks are ground out to create a clean surface for reinforcement.8:44 The repair process involves laminating two or three layers of fiberglass mat over the ground-out areas to restore structural integrity.8:52 Once the epoxy cures, the surface is sanded smooth to prepare for final finishing.14:47 Sabina assists by applying the first layer of epoxy to the reinforced sections and painting the interior of the deckhouse.15:33

Περισσότερα από το Sailing Squib

Sailing Squib May 2026 /2Αυγ 2026Sailing Squib - Contemporary WitnessΙουλ 2026Sailing Squib - May 2026 /1Ιουλ 2026Sailing Squib - We'll take care of the rest on the way - Arrival in Mesolongi/ 33Ιουν 2026

Από Sailing Squib — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.