The Sailing Brothers · βίντεο

Τι καλύπτει αυτό το βίντεο

A windlass installation on the Rival 34 drew roughly 100 critical comments out of 150 on a recent upload, with viewers citing an undersized backing plate and wiring too thin for the load.▶ 0:49 Adam and Luke address both complaints directly.▶ 1:09 On the wiring, they concede the fault and confirm they replaced it with heavier cable at a cost of £200.▶ 1:19 On the backing plate, they acknowledge it is small but argue a windlass experiences no meaningful vertical pull — only horizontal force — and that their snubber and bridle system means the gypsy and motor carry no anchor load at all.▶ 1:23 They explain the upgrade from the original 700-watt unit to a 1,200-watt windlass was necessary because the old motor couldn't retrieve chain in 15 metres of water on a boat displacing roughly seven tonnes loaded.▶ 2:48 They also address the windlass name, confirming it is pronounced "Murr," not as they had been saying.▶ 0:04 The crew considered pulling the original installation video but decided against self-censorship to keep the channel authentic.▶ 3:21 A brief mention places them near the top of Australia, visas cleared, preparing to depart for Indonesia.▶ 3:52

Σκάφη σε αυτό το βίντεο

Περισσότερα από το The Sailing Brothers

Made Our Own COPPER COATING, Will It Work?Ιουν 2026DON'T DO IT!! But We Did It Anyway... HOMEMADE COPPER COATΙουν 2026A Cruisers Nightmare "Scammed By a Child On Facebook Marketplace" Ιουν 2026When Anchors Drag! They T-Boned UsΜαΐ 2026

Από The Sailing Brothers — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.