The Sailing Brothersvídeo
Did We Do It Wrong? | Windlass Update
29 de junio de 2026 · 4 min · 15K visitas · Northern Australia & Kimberley
Qué cubre este vídeo
A windlass installation on the Rival 34 drew roughly 100 critical comments out of 150 on a recent upload, with viewers citing an undersized backing plate and wiring too thin for the load.▶ 0:49 Adam and Luke address both complaints directly.▶ 1:09 On the wiring, they concede the fault and confirm they replaced it with heavier cable at a cost of £200.▶ 1:19 On the backing plate, they acknowledge it is small but argue a windlass experiences no meaningful vertical pull — only horizontal force — and that their snubber and bridle system means the gypsy and motor carry no anchor load at all.▶ 1:23 They explain the upgrade from the original 700-watt unit to a 1,200-watt windlass was necessary because the old motor couldn't retrieve chain in 15 metres of water on a boat displacing roughly seven tonnes loaded.▶ 2:48 They also address the windlass name, confirming it is pronounced "Murr," not as they had been saying.▶ 0:04 The crew considered pulling the original installation video but decided against self-censorship to keep the channel authentic.▶ 3:21 A brief mention places them near the top of Australia, visas cleared, preparing to depart for Indonesia.▶ 3:52
Barcos en este vídeo
Más de The Sailing Brothers
De The Sailing Brothers — mira el barco del canal, la tripulación y cada vídeo analizado.