Acorn To Arabella · βίντεο

Τι καλύπτει αυτό το βίντεο

Steve and guest builder Bob Emster install the stem and stern breasthooks on the wooden vessel *Arabella*.0:36 The team fits the breasthooks, applies shellac to all faying surfaces, and beds the components in Dolphinite before bolting them into the hull with 5/8-inch bronze fasteners.5:01 To ensure a tight fit during installation, they use a temporary 5/8-inch steel rod to pull the blocks against the stem before drilling the final port-to-starboard fastener holes.7:55 After securing the breasthooks, the crew begins fabricating the locust beam shelf.11:09 They use a cedar board to create a rough pattern for the shelf, employing plywood fingers to spile the shape against the frames.12:25 Upon discovering that the available locust stock lacks the necessary length and quality for a single-piece shelf, they decide to install the shelf in four sections to preserve the best timber for the future covering board.13:42

Περισσότερα από το Acorn To Arabella

Saying Goodbye to Newfoundland—and the Man Who Inspired ArabellaΣεπ 2026Upgrading the Rudder and Another Trek To The CliffΑυγ 2026We're Climbing a Wall No One Has Ever Climbed Before | Rock Climbing on Newfoundland's South CoastΙουλ 2026Exploring Newfoundland's Unclimbed Coastal Cliffs by SailboatΙουλ 2026

Από Acorn To Arabella — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.