Acorn To Arabella · video

Cosa tratta questo video

Steve and guest builder Bob Emster install the stem and stern breasthooks on the wooden vessel *Arabella*.0:36 The team fits the breasthooks, applies shellac to all faying surfaces, and beds the components in Dolphinite before bolting them into the hull with 5/8-inch bronze fasteners.5:01 To ensure a tight fit during installation, they use a temporary 5/8-inch steel rod to pull the blocks against the stem before drilling the final port-to-starboard fastener holes.7:55 After securing the breasthooks, the crew begins fabricating the locust beam shelf.11:09 They use a cedar board to create a rough pattern for the shelf, employing plywood fingers to spile the shape against the frames.12:25 Upon discovering that the available locust stock lacks the necessary length and quality for a single-piece shelf, they decide to install the shelf in four sections to preserve the best timber for the future covering board.13:42

Altro da Acorn To Arabella

We Stripped Our Wooden Sailboat Back to Bare Wood... Againott 2026Saying Goodbye to Newfoundland—and the Man Who Inspired Arabellaset 2026Upgrading the Rudder and Another Trek To The Cliffago 2026We're Climbing a Wall No One Has Ever Climbed Before | Rock Climbing on Newfoundland's South Coastlug 2026

Da Acorn To Arabella — guarda la barca, l'equipaggio e ogni video analizzato del canale.

The Sailing Directory Newsletter

Una email con le migliori scoperte della flotta — i momenti, le barche e le storie che meritano il tuo tempo di visione. Inserisci il tuo indirizzo per riceverne una copia.