Acorn To Arabella · video

Hva denne videoen dekker

Steve and guest builder Bob Emster install the stem and stern breasthooks on the wooden vessel *Arabella*.0:36 The team fits the breasthooks, applies shellac to all faying surfaces, and beds the components in Dolphinite before bolting them into the hull with 5/8-inch bronze fasteners.5:01 To ensure a tight fit during installation, they use a temporary 5/8-inch steel rod to pull the blocks against the stem before drilling the final port-to-starboard fastener holes.7:55 After securing the breasthooks, the crew begins fabricating the locust beam shelf.11:09 They use a cedar board to create a rough pattern for the shelf, employing plywood fingers to spile the shape against the frames.12:25 Upon discovering that the available locust stock lacks the necessary length and quality for a single-piece shelf, they decide to install the shelf in four sections to preserve the best timber for the future covering board.13:42

Mer fra Acorn To Arabella

Saying Goodbye to Newfoundland—and the Man Who Inspired Arabellasep. 2026Upgrading the Rudder and Another Trek To The Cliffaug. 2026We're Climbing a Wall No One Has Ever Climbed Before | Rock Climbing on Newfoundland's South Coastjuli 2026Exploring Newfoundland's Unclimbed Coastal Cliffs by Sailboatjuli 2026

Fra Acorn To Arabella – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.