Sven Yrvind · βίντεο

Τι καλύπτει αυτό το βίντεο

Seven polycarbonate windows are glued into Sven Yrvind's small boat using Divinycell foam frames as the bonding substrate. The work is carried out by Petter, a friend of Yrvind's for roughly 15 years and an orthopedic engineer who previously renovated windows professionally — by his count, at least a thousand installations.5:06 Each window is positioned with a suction cup and held steady while adhesive cures; spacers in the tighter sections require extra care due to cramped access.1:29 A pull-test after installation confirms the bond: Petter attempts to dislodge a window by hand and cannot.6:14 When the joint finally fails under extreme force, the Divinycell cell substrate breaks before the glue line does, demonstrating that the adhesive bond to polycarbonate exceeds the foam's own structural strength.6:46 With all seven windows in place, the boat moves one step closer to launch.

Περισσότερα από το Sven Yrvind

Four Sheets of Divinycell for the Hull Sides – I Think That's Enough.Οκτ 2026Nervously Cutting the Divinycell Sheets.Οκτ 2026Trying to Get the Sheerline Right.Οκτ 2026More molds up.Οκτ 2026

Από Sven Yrvind — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.