BoatHowTo · βίντεο

Τι καλύπτει αυτό το βίντεο

Jan Attenstedt and Nigel Calder discuss the procedure for starting a CAT 3054B diesel engine that has remained in indoor storage for several years.0:15 The owner has already replaced the antifreeze, engine oil, primary fuel filter, and secondary fuel filter, and confirmed that the rocker cover components remain coated in oil.0:29 Calder advises that without a pre-lube pump installed to circulate oil through the bearings before ignition, the only practical option is to crank the engine and let it idle.1:03 He notes that oil pressure typically builds within one or two seconds, which is sufficient to fill the new oil filter and distribute lubricant throughout the system.1:08 Calder dismisses the concern that leaving the old oil filter in place would have provided better protection, explaining that every oil change involves a brief period of low pressure.1:46 The engine will sustain no damage from this short startup delay.

Περισσότερα από το BoatHowTo

Boat ELECTRIC PROPULSION with only LEAD ACID Batteries ?? | Ask The Expert with NIGEL CALDERΣεπ 2026MaxProp: More Pitch in Reverse than in Forward? 🤔 | Ask The Expert with NIGEL CALDERΣεπ 2026Common Ground Point with Isolated Saildrives | Ask The Expert with NIGEL CALDERΣεπ 2026How to keep you TANK CLEAN in the days of BIODIESEL.. | Ask The Expert with NIGEL CALDERΑυγ 2026

Από BoatHowTo — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.