BoatHowTo · vidéo

Ce que couvre cette vidéo

Jan Attenstedt and Nigel Calder discuss the procedure for starting a CAT 3054B diesel engine that has remained in indoor storage for several years.0:15 The owner has already replaced the antifreeze, engine oil, primary fuel filter, and secondary fuel filter, and confirmed that the rocker cover components remain coated in oil.0:29 Calder advises that without a pre-lube pump installed to circulate oil through the bearings before ignition, the only practical option is to crank the engine and let it idle.1:03 He notes that oil pressure typically builds within one or two seconds, which is sufficient to fill the new oil filter and distribute lubricant throughout the system.1:08 Calder dismisses the concern that leaving the old oil filter in place would have provided better protection, explaining that every oil change involves a brief period of low pressure.1:46 The engine will sustain no damage from this short startup delay.

Plus de vidéos de BoatHowTo

MaxProp: More Pitch in Reverse than in Forward? 🤔 | Ask The Expert with NIGEL CALDERsept. 2026Common Ground Point with Isolated Saildrives | Ask The Expert with NIGEL CALDERsept. 2026How to keep you TANK CLEAN in the days of BIODIESEL.. | Ask The Expert with NIGEL CALDERaoût 2026PARALLELING Conductors for AMPACITY - is that SAFE?? | Ask The Expert with NIGEL CALDERaoût 2026

De BoatHowTo — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.