BoatHowTo · video

Cosa tratta questo video

Jan Attenstedt and Nigel Calder discuss the procedure for starting a CAT 3054B diesel engine that has remained in indoor storage for several years.0:15 The owner has already replaced the antifreeze, engine oil, primary fuel filter, and secondary fuel filter, and confirmed that the rocker cover components remain coated in oil.0:29 Calder advises that without a pre-lube pump installed to circulate oil through the bearings before ignition, the only practical option is to crank the engine and let it idle.1:03 He notes that oil pressure typically builds within one or two seconds, which is sufficient to fill the new oil filter and distribute lubricant throughout the system.1:08 Calder dismisses the concern that leaving the old oil filter in place would have provided better protection, explaining that every oil change involves a brief period of low pressure.1:46 The engine will sustain no damage from this short startup delay.

Altro da BoatHowTo

Boat ELECTRIC PROPULSION with only LEAD ACID Batteries ?? | Ask The Expert with NIGEL CALDERset 2026MaxProp: More Pitch in Reverse than in Forward? 🤔 | Ask The Expert with NIGEL CALDERset 2026Common Ground Point with Isolated Saildrives | Ask The Expert with NIGEL CALDERset 2026How to keep you TANK CLEAN in the days of BIODIESEL.. | Ask The Expert with NIGEL CALDERago 2026

Da BoatHowTo — guarda la barca, l'equipaggio e ogni video analizzato del canale.

The Sailing Directory Newsletter

Una email con le migliori scoperte della flotta — i momenti, le barche e le storie che meritano il tuo tempo di visione. Inserisci il tuo indirizzo per riceverne una copia.