Salt & Tar · βίντεο

Τι καλύπτει αυτό το βίντεο

Garrett and Ruth laminate a two-layer, 1/2-inch thick pilot house roof for their George Buehler sailboat.3:26 They construct the roof using two layers of 1/4-inch plywood, bonding them with Total Boat epoxy resin.2:59 To maintain the roof's natural crown without deforming the shape with excessive weight, they use a combination of clamps and screws to secure the layers during the cure.1:28 Because the work occurs during a 93-degree heat wave, they maintain a rapid pace to stay within the epoxy's working time.0:46 After the initial lamination, they refine the roof's aesthetic profile by using a long batten to mark the visor curve and routing the bottom edges before final installation.15:19 The project includes plans for future solar panel mounting and rain catchment.10:49 The team emphasizes the importance of avoiding over-analysis during the refit process to maintain progress on the vessel's transformation.

Περισσότερα από το Salt & Tar

Salt & Tar: Ep.361- IN-THE-WATER SurveyΟκτ 2026Meet Victoria - Tour of our William Garden 'Porpoise' built by Robin Fung in 1975Οκτ 2026Salt & Tar: Ep.360- Good NewsΟκτ 2026Salt & Tar: Ep.359- Memory LaneΣεπ 2026

Από Salt & Tar — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.