BoatworksToday · βίντεο

Τι καλύπτει αυτό το βίντεο

Andy modifies the transom of a Bertram powerboat during a conversion from twin inboards to twin outboards with an Armstrong bracket.▶ 2:12 To prevent water from flowing from the deck into the new storage area, he fabricates and bonds composite extensions to the port and starboard sides of the existing transom structure.▶ 4:28 He uses a pre-thickened epoxy cartridge to bond the extensions, noting that the material provides superior strength and convenience for small-scale bonding.▶ 9:57 After the initial cure, he evaluates the joints and decides against applying fiberglass cloth over the seams due to the tight, complex geometry of the area.▶ 17:36 Instead, he opts to build up the low spots and fair the transitions using a structural epoxy mixture thickened with silica.▶ 19:09 He plans to shape and finish these areas to create a sealed, flush surface for the future storage lid. The project demonstrates that most composite modifications can be salvaged or corrected through a process of grinding, filling, fairing, and finishing.▶ 5:12

Περισσότερα από το BoatworksToday

Putting the Anona Orbis Solar Camera to Work on My Property ~ 360 Security CameraΙουλ 2026I Wasn't Sure This Would Work | 42 Hour BBQ on Solar Power | Jackery HomePower 3600 Plus!Ιουλ 2026Keel Faired, Barrier Coat Applied ~ Last Hurdle Before Building the Interior Of This Sailboat!Ιουν 2026Everything Fits! ~ Coosa Bulkheads, New Soles & Closing Out The Old Thruhulls!Ιουν 2026

Από BoatworksToday — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.