Epiphany Sailingvídeo
Replacing our collapsed Dinghy Davits with a new Heavy Duty set C&C 39 Sailboat
16 de enero de 2024 · 6 min · 227 visitas
Qué cubre este vídeo
The crew replaces collapsed dinghy davits on a C&C 39 sailboat with a heavy-duty set to improve structural integrity.Watch The installation begins by removing the old mounts and the block and tackle system while using a temporary pole to support the solar panels.0:17 Because the boat features a narrow 42-inch stern, the new davit system requires a spreader bar to prevent side-loading and twisting, which caused the previous failure.4:33 The installer cuts six inches off the provided 48-inch spreader bar to fit the transom width.5:29 To ensure a watertight seal, the crew uses butyl tape on all old and new mounting holes.2:37 The new mounts include backing plates and fully threaded bolts for a secure fit against the fiberglass.2:08 Gordon assists with the final installation of the spreader bar and upper braces.5:43 The project concludes by reinforcing the davits with back struts, modeled after crane boom rigging, to handle the load of the dinghy and solar array.4:09
Barcos en este vídeo
Más de Epiphany Sailing
De Epiphany Sailing — mira el barco del canal, la tripulación y cada vídeo analizado.
The Sailing Directory Newsletter
Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que merecen tu tiempo de visionado. Introduce tu dirección para recibir tu propia copia.