BoatworksToday · vídeo

Qué cubre este vídeo

Andy completes the heavy fiberglass grinding phase of a boat interior restoration, transitioning from structural demolition to rebuilding.8:18 To prepare the hull for new bulkheads and flooring, he removes residual fiberglass dust by power washing the interior, having first drilled drainage holes in the hull to prevent water accumulation.10:12 He addresses surface defects on Kusa panels using Total Boat structural repair putty, applying it wet-on-wet with polyester resin and 1708 fiberglass cloth.2:35 To restore crusty, resin-caked fin rollers, he burns off the cured resin with a torch, then cleans the remaining residue with acetone and a wire brush.3:22 Future project steps include glassing over the temporary drainage holes, leveling the keel, and installing bulkheads that support the rigging stays.14:24 Once the bulkheads are set, the layout for the V-berth electronics, including Victron components and EPIC lithium-ion batteries, will follow.14:52

Más de BoatworksToday

Will This Entire Victron Electrical System Fit In My Little Boat?ago 2026The Primer Mistake You're Probably Making Painting Your Boat: Film Thickness, Not Smoothness!ago 2026V-Berth Electrical Layout On A Small Sailboat: It's Tight, But It Should Work!ago 2026Putting the Anona Orbis Solar Camera to Work on My Property ~ 360 Security Camerajul 2026

De BoatworksToday — mira el barco del canal, la tripulación y cada vídeo analizado.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que merecen tu tiempo de visionado. Introduce tu dirección para recibir tu propia copia.