BoatworksToday · vídeo

O que este vídeo aborda

Andy completes the heavy fiberglass grinding phase of a boat interior restoration, transitioning from structural demolition to rebuilding.▶ 8:18 To prepare the hull for new bulkheads and flooring, he removes residual fiberglass dust by power washing the interior, having first drilled drainage holes in the hull to prevent water accumulation.▶ 10:12 He addresses surface defects on Kusa panels using Total Boat structural repair putty, applying it wet-on-wet with polyester resin and 1708 fiberglass cloth.▶ 2:35 To restore crusty, resin-caked fin rollers, he burns off the cured resin with a torch, then cleans the remaining residue with acetone and a wire brush.▶ 3:22 Future project steps include glassing over the temporary drainage holes, leveling the keel, and installing bulkheads that support the rigging stays.▶ 14:24 Once the bulkheads are set, the layout for the V-berth electronics, including Victron components and EPIC lithium-ion batteries, will follow.▶ 14:52

Mais de BoatworksToday

I Wasn't Sure This Would Work | 42 Hour BBQ on Solar Power | Jackery HomePower 3600 Plus!jul. de 2026Keel Faired, Barrier Coat Applied ~ Last Hurdle Before Building the Interior Of This Sailboat!jun. de 2026Everything Fits! ~ Coosa Bulkheads, New Soles & Closing Out The Old Thruhulls!jun. de 2026Giraffe Tools x Boatworks | Bringing a 56-Year-Old Sailboat Back To Life!mai. de 2026

De BoatworksToday — veja o barco, a tripulação e cada vídeo analisado do canal.