Sailing Zephyr IV · video

¿Qué cubre este video?

The compass light on a Plastimo Olympic 135 steering compass aboard Zephyr IV failed after light use, and Dave replaces the LED bulb.Watch The cover assembly must be removed first: a clip-on decorative cover conceals two large-headed screws, and the clips require a fine knife blade and a screwdriver simultaneously to release — a three-handed job.1:12 Once the cover is off, the LED sits in a short plastic tube in the static half of the folding cover.1:38 A critical detail: the red supply wire contains an inline resistor that drops the 12-volt supply to a safe level for the LED; cutting the wire to bypass it destroys the bulb instantly.2:03 Orientation also matters — Dave fitted the bulb incorrectly the first time and recommends photographing the original position before removal.1:47 The replacement LED came from a local chandlery, with ten units in stock at £9.50.2:39 Reassembly reverses the disassembly sequence, and polarity must be observed on reconnection: red to positive, black to negative.4:02 The inline resistor in the Plastimo Olympic 135 light wire is the single most important detail to preserve during this repair.

Barcos en este video

Más de Sailing Zephyr IV

Why Cowes Can Be A Sailor’s Nightmare (And How To Fix It)sep 2026I Took the BLUETTI Elite 100 V2 on a boat – Here's What Happenedago 2026Day in the Life of a Solo Sailor at 82 : Cowes to Poolejul 2026Boat Toilet Not Working? I Replaced the Jabsco Pump at 82!jul 2026

De Sailing Zephyr IV — ve el barco, la tripulación y cada video analizado del canal.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que valen tu tiempo de visualización. Ingresa tu propia dirección para obtener tu propia copia.