Classic Yacht TVvideo
EP11 shaping planks: : Building the schooner Malabar IV
27 de enero de 2026 · 13 min · 12K vistas
¿Qué cubre este video?
A boatbuilder demonstrates the full process of laying out and shaping a hull plank for the schooner Malabar IV, a traditional wooden vessel under construction. Using a spiling batten marked at every station frame — spaced three feet apart — the builder transfers frame positions and plank widths from a table of offsets onto raw planking stock.3:31 At each station, a bevel gauge records the changing angle between frame and plank; a bevel stick cut to the same thickness as the plank stock translates that angle into a precise wood addition, the extra material that will be removed when the bevel is cut so the finished plank lands at the correct width.7:06 The builder marks each station, adds the bevel offset, then springs a batten through all points to generate a fair curve for the saw cut.4:17 A brief exchange addresses a discrepancy at station 10 where a neighboring plank had been hogged out; the solution is to tick-stick off the tuck rather than thin the new plank further, keeping the seam even.10:25 Accurate bevel offsets added before cutting are essential to avoid ending up underwidth after fairing.7:45
Más de Classic Yacht TV
De Classic Yacht TV — ve el barco, la tripulación y cada video analizado del canal.
The Sailing Directory Newsletter
Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que valen tu tiempo de visualización. Ingresa tu propia dirección para obtener tu propia copia.