Classic Yacht TV · vidéo

Ce que couvre cette vidéo

A boatbuilder demonstrates the full process of laying out and shaping a hull plank for the schooner Malabar IV, a traditional wooden vessel under construction. Using a spiling batten marked at every station frame — spaced three feet apart — the builder transfers frame positions and plank widths from a table of offsets onto raw planking stock.3:31 At each station, a bevel gauge records the changing angle between frame and plank; a bevel stick cut to the same thickness as the plank stock translates that angle into a precise wood addition, the extra material that will be removed when the bevel is cut so the finished plank lands at the correct width.7:06 The builder marks each station, adds the bevel offset, then springs a batten through all points to generate a fair curve for the saw cut.4:17 A brief exchange addresses a discrepancy at station 10 where a neighboring plank had been hogged out; the solution is to tick-stick off the tuck rather than thin the new plank further, keeping the seam even.10:25 Accurate bevel offsets added before cutting are essential to avoid ending up underwidth after fairing.7:45

Plus de vidéos de Classic Yacht TV

EP13 Fastnet update | Interior layout: Building the schooner MALABAR IVmai 2026EP12 fitting planks: Building the schooner Malabar IVfévr. 2026EP10 Steaming and fitting Green Oak frames: Building the schooner Malabar IVjanv. 2026EP09 Positioning laminated floors and frames, summer recap #3: Building the schooner Malabar IVdéc. 2025

De Classic Yacht TV — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.