Wildling Sailing · video

¿Qué cubre este video?

Refitting a boat for mast installation requires reinforcing the hull and cabin top to support new standing rigging attachment points.0:34 The process involves cutting out sections of foam core, clearing damp plywood, and installing new plywood packing blocks to provide structural backing for chain plates.2:09 Six specific attachment points are prepared: fore and aft intermediate shrouds on both the port and starboard sides, plus two inner forestay bridle points.11:28 Each block is glued into place using epoxy, then sanded and leveled with a lightweight fairing compound to ensure a flat surface for backing plates.14:59 Separately, an outboard motor lower unit requires repeated disassembly to replace leaking drive shaft and shifter seals after water contamination emulsified the gear oil.18:48 The project highlights the time-intensive nature of structural refit work and the mechanical challenges of maintaining older, budget-purchased outboard engines.

Más de Wildling Sailing

One Step Back, One Step Sideways & One Step Forward | My Budget Catamaran Refitoct 2026I Lifted Her Out For a Very Important Rebuild.sep 2026One Final Refit Before Crossing The Atlantic.ago 20262 Days Alone at Sea On my Primitive Double-Canoe.ago 2026

De Wildling Sailing — ve el barco, la tripulación y cada video analizado del canal.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que valen tu tiempo de visualización. Ingresa tu propia dirección para obtener tu propia copia.