VOILIER ODIN · video

¿Qué cubre este video?

The electrical refit of a sailboat involves installing a central bus bar system, connecting solar panels to an MPPT controller, and wiring a 25-amp shore power charger to an AGM battery bank.1:09 The project uses 70mm² cable for the main battery-to-bus bar connections to ensure high current capacity and minimize voltage drop.2:17 A dedicated fuse is installed between the battery bank and the distribution panel to protect the supply line, addressing a previous lack of upstream circuit protection.8:51 The owner also wires the engine starter motor using the shortest possible cable run to maintain efficiency, opting for a direct path behind the engine compartment.24:06 Technical consultation with the battery manufacturer confirms that the AGM batteries, which are designed for engine starting, should show a full charge voltage of approximately 13.7 to 13.8 volts, with charging voltages between 14.5 and 14.8 volts.22:08 The installation process highlights the difficulty of routing cables through tight spaces and the challenge of removing industrial-strength adhesive from panels.5:56

Más de VOILIER ODIN

Sailing under asymmetric spinnaker with a Sun Odysseyago 2026TOP NAVIGATION - WORTH REPEATING WITHOUT HESITATIONago 2026WHY I'M MOVING BACK TO FRANCEjul 2026THIS IS ALSO WHAT BOAT LIFE IS LIKEjun 2026

De VOILIER ODIN — ve el barco, la tripulación y cada video analizado del canal.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que valen tu tiempo de visualización. Ingresa tu propia dirección para obtener tu propia copia.