VOILIER ODIN · vidéo

Ce que couvre cette vidéo

The electrical refit of a sailboat involves installing a central bus bar system, connecting solar panels to an MPPT controller, and wiring a 25-amp shore power charger to an AGM battery bank.1:09 The project uses 70mm² cable for the main battery-to-bus bar connections to ensure high current capacity and minimize voltage drop.2:17 A dedicated fuse is installed between the battery bank and the distribution panel to protect the supply line, addressing a previous lack of upstream circuit protection.8:51 The owner also wires the engine starter motor using the shortest possible cable run to maintain efficiency, opting for a direct path behind the engine compartment.24:06 Technical consultation with the battery manufacturer confirms that the AGM batteries, which are designed for engine starting, should show a full charge voltage of approximately 13.7 to 13.8 volts, with charging voltages between 14.5 and 14.8 volts.22:08 The installation process highlights the difficulty of routing cables through tight spaces and the challenge of removing industrial-strength adhesive from panels.5:56

Plus de vidéos de VOILIER ODIN

Sailing under asymmetric spinnaker with a Sun Odysseyaoût 2026TOP NAVIGATION - WORTH REPEATING WITHOUT HESITATIONaoût 2026WHY I'M MOVING BACK TO FRANCEjuil. 2026THIS IS ALSO WHAT BOAT LIFE IS LIKEjuin 2026

De VOILIER ODIN — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.