Atom Voyagervidéo
Sealing a Leaky Hull To Deck Joint
13 avril 2026 · 9 min · 3K vues
Hull-to-deck joint with corroded fasteners and worn sealant
Ce que couvre cette vidéo
Atom repairs a leaking hull-to-deck joint on a Pearson Yachts-USA Triton by removing deck hardware, including sheet tracks, stanchions, and chain plates.▶ 0:09 To access the interior fasteners, he cuts away sections of the fiberglass cabin liner, which he later modifies to be reattached with screws for future maintenance.▶ 3:02 After grinding the joint clean and cutting flush any protruding bolts, he fills gaps and holes with U.S. Composites 635 epoxy thickened with 406 filler and fumed silica.▶ 4:29 He applies fiberglass cloth over the joint using a chip brush to ensure a watertight seal.▶ 6:56 To finish, he removes the amine blush from the cured epoxy with warm water, sands the surface, and installs wood blocks to support the reattached liner panels.▶ 7:39 The project also includes adding a third bilge access hatch at the aft end of the cabin.▶ 9:19
Bateaux dans cette vidéo
Plus de vidéos de Atom Voyager
De Atom Voyager — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.