Hashtag Sal · vidéo

Ce que couvre cette vidéo

Adriano Plotzky repairs localized osmosis blisters on the hull of his boat, Balanço, by sanding down to the gelcoat and drying the laminate.0:14 Although no blisters were visible before sanding, the process revealed small, vinegar-scented droplets trapped in the fiberglass.0:18 To identify moisture levels, he uses a 160-real moisture meter purchased in Curitiba, which allows him to compare relative humidity across different hull sections.0:40 Because the meter lacks specific fiberglass calibration, he uses it to pinpoint areas requiring targeted drying rather than relying on absolute percentage readings.0:47 To accelerate the drying process in cooler weather, he constructs a plastic greenhouse enclosure around the hull to trap solar heat.1:36 After cleaning the opened blisters with acetone and a hair dryer, he fills the voids with a mixture of epoxy resin, hardener in a 60-40 ratio, and fiberglass microspheres.3:12 He uses a scale to ensure precise mixing ratios and applies the filler with a spatula, later sanding the cured patches flush.3:45

Plus de vidéos de Hashtag Sal

The First Sailing Trip of 4 Guys from Minas: A Complete Disastersept. 2026They Sold Everything and Headed Straight for the Anchor | #SAL #436sept. 2026The Social Project Teaching the New Generation of Sailors | #SAL #74 Clipsept. 2026This Was the Last Sailing of a Chapter in My Life | #SAIL #434sept. 2026

De Hashtag Sal — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.