Sven Yrvind · vidéo

Ce que couvre cette vidéo

Sven Yrvind fabricates a custom masthead fitting for a small, shallow-draught boat intended for a 14,000-mile non-stop circumnavigation through the Southern Ocean.▶ 0:17 He shapes a block of Tufnol to fit the masthead, drilling a 10 mm hole for the halyard and 7 mm holes for the topping lifts.▶ 1:20 The design incorporates a navigation light, requiring precise drilling for mounting screws and electrical cable routing.▶ 1:57 Yrvind simplifies the rigging plan by transitioning from two topping lifts to a single diagonal configuration.▶ 5:48 He uses a conduit to protect the wiring and plans to reinforce the cable entry point with fiberglass.▶ 6:03 The process involves iterative drilling and fitting to ensure the Tufnol block seats correctly against the mast.▶ 5:11

Plus de vidéos de Sven Yrvind

Kai the bow paddle.juil. 2026About safety.juil. 2026My solution to crossing the Doldrums without using an engine.juil. 2026Goose Barnacles Remower.juil. 2026

De Sven Yrvind — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.